public class DragSource extends Widget
DragSource
defines the source object for a drag and drop transfer.
IMPORTANT: This class is not intended to be subclassed.
A drag source is the object which originates a drag and drop operation. For the specified widget,
it defines the type of data that is available for dragging and the set of operations that can
be performed on that data. The operations can be any bit-wise combination of DND.MOVE, DND.COPY or
DND.LINK. The type of data that can be transferred is specified by subclasses of Transfer such as
TextTransfer or FileTransfer. The type of data transferred can be a predefined system type or it
can be a type defined by the application. For instructions on how to define your own transfer type,
refer to ByteArrayTransfer
.
You may have several DragSources in an application but you can only have one DragSource per Control. Data dragged from this DragSource can be dropped on a site within this application or it can be dropped on another application such as an external Text editor.
The application supplies the content of the data being transferred by implementing the
DragSourceListener
and associating it with the DragSource via DragSource#addDragListener.
When a successful move operation occurs, the application is required to take the appropriate action to remove the data from its display and remove any associated operating system resources or internal references. Typically in a move operation, the drop target makes a copy of the data and the drag source deletes the original. However, sometimes copying the data can take a long time (such as copying a large file). Therefore, on some platforms, the drop target may actually move the data in the operating system rather than make a copy. This is usually only done in file transfers. In this case, the drag source is informed in the DragEnd event that a DROP_TARGET_MOVE was performed. It is the responsibility of the drag source at this point to clean up its displayed information. No action needs to be taken on the operating system resources.
The following example shows a Label widget that allows text to be dragged from it.
// Enable a label as a Drag Source
Label label = new Label(shell, SWT.NONE);
// This example will allow text to be dragged
Transfer[] types = new Transfer[] {TextTransfer.getInstance()};
// This example will allow the text to be copied or moved to the drop target
int operations = DND.DROP_MOVE | DND.DROP_COPY;
DragSource source = new DragSource(label, operations);
source.setTransfer(types);
source.addDragListener(new DragSourceListener() {
public void dragStart(DragSourceEvent e) {
// Only start the drag if there is actually text in the
// label - this text will be what is dropped on the target.
if (label.getText().length() == 0) {
event.doit = false;
}
};
public void dragSetData(DragSourceEvent event) {
// A drop has been performed, so provide the data of the
// requested type.
// (Checking the type of the requested data is only
// necessary if the drag source supports more than
// one data type but is shown here as an example).
if (TextTransfer.getInstance().isSupportedType(event.dataType)){
event.data = label.getText();
}
}
public void dragFinished(DragSourceEvent event) {
// A Move operation has been performed so remove the data
// from the source
if (event.detail == DND.DROP_MOVE)
label.setText("");
}
});
Constructor and Description |
---|
DragSource(Control control,
int style)
Creates a new
DragSource to handle dragging from the specified Control . |
Modifier and Type | Method and Description |
---|---|
void |
addDragListener(DragSourceListener listener)
Adds the listener to the collection of listeners who will
be notified when a drag and drop operation is in progress, by sending
it one of the messages defined in the
DragSourceListener
interface. |
protected void |
checkSubclass()
Checks that this class can be subclassed.
|
<T> T |
getAdapter(java.lang.Class<T> adapter)
Implementation of the
Adaptable interface. |
Control |
getControl()
Returns the Control which is registered for this DragSource.
|
DragSourceListener[] |
getDragListeners()
Returns an array of listeners who will be notified when a drag and drop
operation is in progress, by sending it one of the messages defined in
the
DragSourceListener interface. |
DragSourceEffect |
getDragSourceEffect()
Returns the drag effect that is registered for this DragSource.
|
Transfer[] |
getTransfer()
Returns the list of data types that can be transferred by this DragSource.
|
void |
removeDragListener(DragSourceListener listener)
Removes the listener from the collection of listeners who will
be notified when a drag and drop operation is in progress.
|
void |
setDragSourceEffect(DragSourceEffect effect)
Specifies the drag effect for this DragSource.
|
void |
setTransfer(Transfer[] transferAgents)
Specifies the list of data types that can be transferred by this DragSource.
|
addDisposeListener, addListener, checkWidget, dispose, getData, getData, getDisplay, getListeners, getStyle, isDisposed, isListening, notifyListeners, removeDisposeListener, removeListener, removeListener, reskin, setData, setData, toString
public DragSource(Control control, int style)
DragSource
to handle dragging from the specified Control
.
Creating an instance of a DragSource may cause system resources to be allocated depending on the platform.
It is therefore mandatory that the DragSource instance be disposed when no longer required.control
- the Control
that the user clicks on to initiate the dragstyle
- the bitwise OR'ing of allowed operations; this may be a combination of any of
DND.DROP_NONE, DND.DROP_COPY, DND.DROP_MOVE, DND.DROP_LINKSWTException
- SWTError
- NOTE: ERROR_CANNOT_INIT_DRAG should be an SWTException, since it is a recoverable error, but can not be changed due to backward compatibility.
Widget.dispose()
,
checkSubclass()
,
DND.DROP_NONE
,
DND.DROP_COPY
,
DND.DROP_MOVE
,
DND.DROP_LINK
public void addDragListener(DragSourceListener listener)
DragSourceListener
interface.
dragStart
is called when the user has begun the actions required to drag the widget.
This event gives the application the chance to decide if a drag should be started.
dragSetData
is called when the data is required from the drag source.
dragFinished
is called when the drop has successfully completed (mouse up
over a valid target) or has been terminated (such as hitting the ESC key). Perform cleanup
such as removing data from the source side on a successful move operation.
listener
- the listener which should be notifiedjava.lang.IllegalArgumentException
- SWTException
- DragSourceListener
,
getDragListeners()
,
removeDragListener(org.eclipse.swt.dnd.DragSourceListener)
,
DragSourceEvent
protected void checkSubclass()
Widget
The SWT class library is intended to be subclassed
only at specific, controlled points (most notably,
Composite
and Canvas
when
implementing new widgets). This method enforces this
rule unless it is overridden.
IMPORTANT: By providing an implementation of this method that allows a subclass of a class which does not normally allow subclassing to be created, the implementer agrees to be fully responsible for the fact that any such subclass will likely fail between SWT releases and will be strongly platform specific. No support is provided for user-written classes which are implemented in this fashion.
The ability to subclass outside of the allowed SWT classes is intended purely to enable those not on the SWT development team to implement patches in order to get around specific limitations in advance of when those limitations can be addressed by the team. Subclassing should not be attempted without an intimate and detailed understanding of the hierarchy.
checkSubclass
in class Widget
public Control getControl()
public DragSourceListener[] getDragListeners()
DragSourceListener
interface.SWTException
- DragSourceListener
,
addDragListener(org.eclipse.swt.dnd.DragSourceListener)
,
removeDragListener(org.eclipse.swt.dnd.DragSourceListener)
,
DragSourceEvent
public DragSourceEffect getDragSourceEffect()
public Transfer[] getTransfer()
public void removeDragListener(DragSourceListener listener)
listener
- the listener which should no longer be notifiedjava.lang.IllegalArgumentException
- SWTException
- DragSourceListener
,
addDragListener(org.eclipse.swt.dnd.DragSourceListener)
,
getDragListeners()
public void setDragSourceEffect(DragSourceEffect effect)
effect
- the drag effect that is registered for this DragSourcepublic void setTransfer(Transfer[] transferAgents)
transferAgents
- a list of Transfer objects which define the types of data that can be
dragged from this sourcepublic <T> T getAdapter(java.lang.Class<T> adapter)
Widget
Adaptable
interface.
IMPORTANT: This method is not part of the RWT public API. It is marked public only so that it can be shared within the packages provided by RWT. It should never be accessed from application code.
getAdapter
in interface Adaptable
getAdapter
in class Widget
adapter
- the lookup classnull
if
there is no adapter associated with the given class.
Copyright (c) EclipseSource and others 2002, 2016.
All rights reserved. This program and the accompanying materials
are made available under the terms of the
Eclipse Public License v1.0