Uses of Class
org.eclipse.swt.widgets.Control

Packages that use Control

org.eclipse.rap.rwt.lifecycle
org.eclipse.rap.rwt.theme
org.eclipse.rap.rwt.widgets
org.eclipse.swt.accessibility
org.eclipse.swt.browser
org.eclipse.swt.custom
org.eclipse.swt.dnd
org.eclipse.swt.layout
org.eclipse.swt.widgets

Uses of Control in org.eclipse.rap.rwt.lifecycle

Methods in org.eclipse.rap.rwt.lifecycle with parameters of type Control

void	AbstractWidgetLCA.doRedrawFake(Control control) As a side effect to redraw calls some native widgets trigger events like resize for example.
static void	ControlLCAUtil.preserveBackgroundImage(Control control) Preserves the value of the specified widget's background image.
static void	ControlLCAUtil.preserveValues(Control control) Preserves the values of the following properties of the specified control: bounds z-index (except for Shells) tab index tool tip text menu visible enabled foreground background background image font cursor whether ControlListeners are registered whether ActivateListeners are registered whether MouseListeners are registered whether FocusListeners are registered whether KeyListeners are registered whether TraverseListeners are registered whether HelpListeners are registered whether MenuDetectListeners are registered
static void	ControlLCAUtil.processEvents(Control control)
static void	ControlLCAUtil.processKeyEvents(Control control)
static void	ControlLCAUtil.processMenuDetect(Control control) Process a HelpEvent if the current request specifies that there occured a help event for the given widget.
static void	ControlLCAUtil.processMouseEvents(Control control)
static void	ControlLCAUtil.readBounds(Control control) Reads the bounds of the specified control from the current request and applies it to the control.
static void	ControlLCAUtil.renderBackground(Control control) Determines whether the property background of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side background property.
static void	ControlLCAUtil.renderBackgroundImage(Control control) Determines whether the background image of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side background image property.
static void	ControlLCAUtil.renderBounds(Control control) Determines whether the bounds of the given control have changed during the processing of the current request and if so, writes JavaScript code to the response that updates the client-side bounds.
static void	ControlLCAUtil.renderChanges(Control control) Determines for all of the following properties of the specified control whether the property has changed during the processing of the current request and if so, writes a protocol message to the response that updates the corresponding client-side property.
static void	ControlLCAUtil.renderEnabled(Control control) Determines whether the property enabled of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side enabled property.
static void	ControlLCAUtil.renderFont(Control control) Determines whether the property font of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side font property.
static void	ControlLCAUtil.renderForeground(Control control) Determines whether the property foreground of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side foreground property.
static void	ControlLCAUtil.renderMenu(Control control) Determines whether the property menu of the given control has changed during the processing of the current request and if so, writes a protocol message to the response that updates the client-side menu property.
static void	ControlLCAUtil.renderToolTip(Control control) Determines whether the tool tip of the given control has changed during the processing of the current request and if so, writes JavaScript code to the response that updates the client-side tool tip.
static void	ControlLCAUtil.renderVisible(Control control) Determines whether the visibility of the given control has changed during the processing of the current request and if so, writes JavaScript code to the response that updates the client-side visibility.

Uses of Control in org.eclipse.rap.rwt.theme

Methods in org.eclipse.rap.rwt.theme with parameters of type Control

Color	ControlThemeAdapter.getBackground(Control control) Returns the default background color that the specified control will use if no user-defined background color has been set using setBackground(Color).
int	ControlThemeAdapter.getBorderWidth(Control control) Returns the width of the specified control's border.
Font	ControlThemeAdapter.getFont(Control control) Returns the default font that the specified control will use to paint textual information when no user-defined font has been set using setFont(Font).
Color	ControlThemeAdapter.getForeground(Control control) Returns the default foreground color that the specified control will use to draw if no user defined foreground color has been set using setForeground(Color).
Rectangle	ControlThemeAdapter.getPadding(Control control) Returns the padding of the specified control.

Uses of Control in org.eclipse.rap.rwt.widgets

Subclasses of Control in org.eclipse.rap.rwt.widgets

class

FileUpload A button-like widget allowing to select a file from the client's file system and to upload this file to a given URL using HTTP POST.

Methods in org.eclipse.rap.rwt.widgets that return Control

Control[]

FileUpload.getChildren()

Uses of Control in org.eclipse.swt.accessibility

Methods in org.eclipse.swt.accessibility that return Control

Control

Accessible.getControl() Returns the control for this Accessible object.

Methods in org.eclipse.swt.accessibility with parameters of type Control

static Accessible

Accessible.internal_new_Accessible(Control control) Invokes platform specific functionality to allocate a new accessible object.

Uses of Control in org.eclipse.swt.browser

Subclasses of Control in org.eclipse.swt.browser

class

Browser Instances of this class implement the browser user interface metaphor.

Uses of Control in org.eclipse.swt.custom

Subclasses of Control in org.eclipse.swt.custom

class	CBanner Instances of this class implement a Composite that lays out its children and allows programmatic control of the layout.
class	CCombo The CCombo class represents a selectable user interface object that combines a text field and a list and issues notification when an item is selected from the list.
class	CLabel A Label which supports aligned text and/or an image and different border styles.
class	CTabFolder Instances of this class implement the notebook user interface metaphor.
class	SashForm The SashForm is a composite control that lays out its children in a row or column arrangement (as specified by the orientation) and places a Sash between each child.
class	ScrolledComposite A ScrolledComposite provides scrollbars and will scroll its content when the user uses the scrollbars.
class	ViewForm Instances of this class implement a Composite that positions and sizes children and allows programmatic control of layout and border parameters.

Fields in org.eclipse.swt.custom declared as Control

Control

StackLayout.topControl topControl the Control that is displayed at the top of the stack.

Methods in org.eclipse.swt.custom that return Control

Control	CBanner.getBottom() Returns the Control that appears on the bottom side of the banner.
Control[]	CCombo.getChildren()
Control	ScrolledComposite.getContent() Get the content that is being scrolled.
Control	ViewForm.getContent() Returns the content area.
Control	CTabItem.getControl() Gets the control that is displayed in the content area of the tab item.
Control	ControlEditor.getEditor() Returns the Control that is displayed above the composite being edited.
Control	CBanner.getLeft() Returns the Control that appears on the left side of the banner.
Control	SashForm.getMaximizedControl() Answer the control that currently is maximized in the SashForm.
Control	CBanner.getRight() Returns the Control that appears on the right side of the banner.
Control	ViewForm.getTopCenter() Returns Control that appears in the top center of the pane.
Control	ViewForm.getTopLeft() Returns the Control that appears in the top left corner of the pane.
Control	CTabFolder.getTopRight() Returns the control in the top right corner of the tab folder.
Control	ViewForm.getTopRight() Returns the control in the top right corner of the pane.

Methods in org.eclipse.swt.custom with parameters of type Control

protected boolean	StackLayout.flushCache(Control control)
void	CBanner.setBottom(Control control) Set the control that appears on the bottom side of the banner.
void	ScrolledComposite.setContent(Control content) Set the content that will be scrolled.
void	ViewForm.setContent(Control content) Sets the content.
void	CTabItem.setControl(Control control) Sets the control that is used to fill the client area of the tab folder when the user selects the tab item.
void	ControlEditor.setEditor(Control editor) Specify the Control that is to be displayed.
void	TableEditor.setEditor(Control editor)
void	TreeEditor.setEditor(Control editor)
void	TableEditor.setEditor(Control editor, TableItem item, int column) Specify the Control that is to be displayed and the cell in the table that it is to be positioned above.
void	TreeEditor.setEditor(Control editor, TreeItem item) Specify the Control that is to be displayed and the cell in the tree that it is to be positioned above.
void	TreeEditor.setEditor(Control editor, TreeItem item, int column) Specify the Control that is to be displayed and the cell in the tree that it is to be positioned above.
void	CBanner.setLeft(Control control) Set the control that appears on the left side of the banner.
void	SashForm.setMaximizedControl(Control control) Specify the control that should take up the entire client area of the SashForm.
void	CBanner.setRight(Control control) Set the control that appears on the right side of the banner.
void	ViewForm.setTopCenter(Control topCenter) Set the control that appears in the top center of the pane.
void	ViewForm.setTopLeft(Control c) Set the control that appears in the top left corner of the pane.
void	CTabFolder.setTopRight(Control control) Set the control that appears in the top right corner of the tab folder.
void	ViewForm.setTopRight(Control c) Set the control that appears in the top right corner of the pane.
void	CTabFolder.setTopRight(Control control, int alignment) Set the control that appears in the top right corner of the tab folder.
void	ScrolledComposite.showControl(Control control) Scrolls the content of the receiver so that the control is visible.

Uses of Control in org.eclipse.swt.dnd

Methods in org.eclipse.swt.dnd that return Control

Control	DragSource.getControl() Returns the Control which is registered for this DragSource.
Control	DragSourceEffect.getControl() Returns the Control which is registered for this DragSourceEffect.
Control	DropTarget.getControl() Returns the Control which is registered for this DropTarget.
Control	DropTargetEffect.getControl() Returns the Control which is registered for this DropTargetEffect.

Constructors in org.eclipse.swt.dnd with parameters of type Control

DragSource(Control control, int style)
Creates a new DragSource to handle dragging from the specified Control.

DragSourceEffect(Control control)
Creates a new DragSourceEffect to handle drag effect from the specified Control.

DropTarget(Control control, int style)
Creates a new DropTarget to allow data to be dropped on the specified Control.

DropTargetEffect(Control control)
Creates a new DropTargetEffect to handle the drag under effect on the specified Control.

Uses of Control in org.eclipse.swt.layout

Fields in org.eclipse.swt.layout declared as Control

Control

FormAttachment.control control specifies the control to which the control side is attached.

Methods in org.eclipse.swt.layout with parameters of type Control

protected boolean	FillLayout.flushCache(Control control)
protected boolean	FormLayout.flushCache(Control control)
protected boolean	GridLayout.flushCache(Control control)
protected boolean	RowLayout.flushCache(Control control)

Constructors in org.eclipse.swt.layout with parameters of type Control

FormAttachment(Control control)
Constructs a new instance of this class given a control.

FormAttachment(Control control, int offset)
Constructs a new instance of this class given a control and an offset.

FormAttachment(Control control, int offset, int alignment)
Constructs a new instance of this class given a control, an offset and an alignment.

Uses of Control in org.eclipse.swt.widgets

Subclasses of Control in org.eclipse.swt.widgets

class	Button Instances of this class represent a selectable user interface object that issues notification when pressed and released.
class	Canvas Instances of this class provide a surface for drawing arbitrary graphics.
class	Combo Instances of this class are controls that allow the user to choose an item from a list of items, or optionally enter a new value by typing it into an editable text field.
class	Composite Instances of this class are controls which are capable of containing other controls.
class	CoolBar Instances of this class provide an area for dynamically positioning the items they contain.
class	DateTime Instances of this class are selectable user interface objects that allow the user to enter and modify date or time values.
class	Decorations This class was introduced to be API compatible with SWT and does only provide those methods that are absolutely necessary to serve this purpose.
class	ExpandBar Instances of this class support the layout of selectable expand bar items.
class	Group Instances of this class provide an etched border with an optional title.
class	Label Instances of this class represent a non-selectable user interface object that displays a string or image.
class	Link Instances of this class represent a selectable user interface object that displays a text with links.
class	List Instances of this class represent a selectable user interface object that displays a list of strings and issues notification when a string is selected.
class	ProgressBar Instances of the receiver represent is an unselectable user interface object that is used to display progress, typically in the form of a bar.
class	Sash Instances of the receiver represent a selectable user interface object that allows the user to drag a rubber banded outline of the sash within the parent control.
class	Scale Instances of the receiver represent a selectable user interface object that present a range of continuous numeric values.
class	Scrollable This class is the abstract superclass of all classes which represent controls that have standard scroll bars.
class	Shell Instances of this class represent the "windows" which the desktop or "window manager" is managing.
class	Slider Instances of this class are selectable user interface objects that represent a range of positive, numeric values.
class	Spinner Instances of this class are selectable user interface objects that allow the user to enter and modify numeric values.
class	TabFolder Instances of this class implement the notebook user interface metaphor.
class	Table Instances of this class implement a selectable user interface object that displays a list of images and strings and issues notification when selected.
class	Text Instances of this class are selectable user interface objects that allow the user to enter and modify text.
class	ToolBar Instances of this class support the layout of selectable tool bar items.
class	Tree Instances of this class provide a selectable user interface object that displays a hierarchy of items and issues notification when an item in the hierarchy is selected.

Methods in org.eclipse.swt.widgets that return Control

Control[]	Composite.getChildren() Returns a (possibly empty) array containing the receiver's children.
Control	CoolItem.getControl() Returns the control that is associated with the receiver.
Control	ExpandItem.getControl() Returns the control that is shown when the item is expanded.
Control	TabItem.getControl() Returns the control that is used to fill the client area of the tab folder when the user selects the tab item.
Control	ToolItem.getControl() Returns the control that is used to fill the bounds of the item when the item is a SEPARATOR.
Control	Display.getCursorControl() Returns the control which the on-screen pointer is currently over top of, or null if it is not currently over one of the controls built by the currently running application.
Control	Display.getFocusControl() Returns the control which currently has keyboard focus, or null if keyboard events are not currently going to any of the controls built by the currently running application.
Control[]	Composite.getTabList() Gets the (possibly empty) tabbing order for the control.

Methods in org.eclipse.swt.widgets with parameters of type Control

void	Composite.changed(Control[] changed) Clears any data that has been cached by a Layout for all widgets that are in the parent hierarchy of the changed control up to and including the receiver.
void	Tree.changed(Control[] changed)
protected boolean	Layout.flushCache(Control control) Instruct the layout to flush any cached values associated with the control specified in the argument control.
void	Composite.layout(Control[] changed) Forces a lay out (that is, sets the size and location) of all widgets that are in the parent hierarchy of the changed control up to and including the receiver.
void	Composite.layout(Control[] changed, int flags) Forces a lay out (that is, sets the size and location) of all widgets that are in the parent hierarchy of the changed control up to and including the receiver.
Point	Display.map(Control from, Control to, int x, int y) Maps a point from one coordinate system to another.
Rectangle	Display.map(Control from, Control to, int x, int y, int width, int height) Maps a point from one coordinate system to another.
Point	Display.map(Control from, Control to, Point point) Maps a point from one coordinate system to another.
Rectangle	Display.map(Control from, Control to, Rectangle rectangle) Maps a point from one coordinate system to another.
void	Control.moveAbove(Control control) Moves the receiver above the specified control in the drawing order.
void	Control.moveBelow(Control control) Moves the receiver below the specified control in the drawing order.
void	CoolItem.setControl(Control control) Sets the control that is associated with the receiver to the argument.
void	ExpandItem.setControl(Control control) Sets the control that is shown when the item is expanded.
void	TabItem.setControl(Control control) Sets the control that is used to fill the client area of the tab folder when the user selects the tab item.
void	ToolItem.setControl(Control control) Sets the control that is used to fill the bounds of the item when the item is a SEPARATOR.
void	Composite.setTabList(Control[] tabList) Sets the tabbing order for the specified controls to match the order that they occur in the argument list.

Constructors in org.eclipse.swt.widgets with parameters of type Control

Menu(Control parent)
Constructs a new instance of this class given its parent, and sets the style for the instance so that the instance will be a popup menu on the given parent's shell.