Eclipse Remote Application Platform

org.eclipse.swt.dnd
Class DragSource

java.lang.Object
  extended by org.eclipse.swt.widgets.Widget
      extended by org.eclipse.swt.dnd.DragSource
All Implemented Interfaces:
Adaptable

public class DragSource
extends Widget

DragSource defines the source object for a drag and drop transfer.

IMPORTANT: This class is not intended to be subclassed.

A drag source is the object which originates a drag and drop operation. For the specified widget, it defines the type of data that is available for dragging and the set of operations that can be performed on that data. The operations can be any bit-wise combination of DND.MOVE, DND.COPY or DND.LINK. The type of data that can be transferred is specified by subclasses of Transfer such as TextTransfer or FileTransfer. The type of data transferred can be a predefined system type or it can be a type defined by the application. For instructions on how to define your own transfer type, refer to ByteArrayTransfer.

You may have several DragSources in an application but you can only have one DragSource per Control. Data dragged from this DragSource can be dropped on a site within this application or it can be dropped on another application such as an external Text editor.

The application supplies the content of the data being transferred by implementing the DragSourceListener and associating it with the DragSource via DragSource#addDragListener.

When a successful move operation occurs, the application is required to take the appropriate action to remove the data from its display and remove any associated operating system resources or internal references. Typically in a move operation, the drop target makes a copy of the data and the drag source deletes the original. However, sometimes copying the data can take a long time (such as copying a large file). Therefore, on some platforms, the drop target may actually move the data in the operating system rather than make a copy. This is usually only done in file transfers. In this case, the drag source is informed in the DragEnd event that a DROP_TARGET_MOVE was performed. It is the responsibility of the drag source at this point to clean up its displayed information. No action needs to be taken on the operating system resources.

The following example shows a Label widget that allows text to be dragged from it.

        // Enable a label as a Drag Source
        Label label = new Label(shell, SWT.NONE);
        // This example will allow text to be dragged
        Transfer[] types = new Transfer[] {TextTransfer.getInstance()};
        // This example will allow the text to be copied or moved to the drop target
        int operations = DND.DROP_MOVE | DND.DROP_COPY;
        
        DragSource source = new DragSource(label, operations);
        source.setTransfer(types);
        source.addDragListener(new DragSourceListener() {
                public void dragStart(DragSourceEvent e) {
                        // Only start the drag if there is actually text in the
                        // label - this text will be what is dropped on the target.
                        if (label.getText().length() == 0) {
                                event.doit = false;
                        }
                };
                public void dragSetData(DragSourceEvent event) {
                        // A drop has been performed, so provide the data of the 
                        // requested type.
                        // (Checking the type of the requested data is only 
                        // necessary if the drag source supports more than 
                        // one data type but is shown here as an example).
                        if (TextTransfer.getInstance().isSupportedType(event.dataType)){
                                event.data = label.getText();
                        }
                }
                public void dragFinished(DragSourceEvent event) {
                        // A Move operation has been performed so remove the data
                        // from the source
                        if (event.detail == DND.DROP_MOVE)
                                label.setText("");
                }
        });
 
Styles
DND.DROP_NONE, DND.DROP_COPY, DND.DROP_MOVE, DND.DROP_LINK
Events
DND.DragStart, DND.DragSetData, DND.DragEnd

Since:
1.3

Constructor Summary
DragSource(Control control, int style)
          Creates a new DragSource to handle dragging from the specified Control.
 
Method Summary
 void addDragListener(DragSourceListener listener)
          Adds the listener to the collection of listeners who will be notified when a drag and drop operation is in progress, by sending it one of the messages defined in the DragSourceListener interface.
protected  void checkSubclass()
          Checks that this class can be subclassed.
<T> T
getAdapter(java.lang.Class<T> adapter)
          Implementation of the Adaptable interface.
 Control getControl()
          Returns the Control which is registered for this DragSource.
 DragSourceListener[] getDragListeners()
          Returns an array of listeners who will be notified when a drag and drop operation is in progress, by sending it one of the messages defined in the DragSourceListener interface.
 DragSourceEffect getDragSourceEffect()
          Returns the drag effect that is registered for this DragSource.
 Transfer[] getTransfer()
          Returns the list of data types that can be transferred by this DragSource.
 void removeDragListener(DragSourceListener listener)
          Removes the listener from the collection of listeners who will be notified when a drag and drop operation is in progress.
 void setDragSourceEffect(DragSourceEffect effect)
          Specifies the drag effect for this DragSource.
 void setTransfer(Transfer[] transferAgents)
          Specifies the list of data types that can be transferred by this DragSource.
 
Methods inherited from class org.eclipse.swt.widgets.Widget
addDisposeListener, addListener, checkWidget, dispose, getData, getData, getDisplay, getListeners, getStyle, isDisposed, isListening, notifyListeners, removeDisposeListener, removeListener, removeListener, reskin, setData, setData, toString
 
Methods inherited from class java.lang.Object
clone, equals, finalize, getClass, hashCode, notify, notifyAll, wait, wait, wait
 

Constructor Detail

DragSource

public DragSource(Control control,
                  int style)
Creates a new DragSource to handle dragging from the specified Control. Creating an instance of a DragSource may cause system resources to be allocated depending on the platform. It is therefore mandatory that the DragSource instance be disposed when no longer required.

Parameters:
control - the Control that the user clicks on to initiate the drag
style - the bitwise OR'ing of allowed operations; this may be a combination of any of DND.DROP_NONE, DND.DROP_COPY, DND.DROP_MOVE, DND.DROP_LINK
Throws:
SWTException -
  • ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the parent
  • ERROR_INVALID_SUBCLASS - if this class is not an allowed subclass
SWTError -
  • ERROR_CANNOT_INIT_DRAG - unable to initiate drag source; this will occur if more than one drag source is created for a control or if the operating system will not allow the creation of the drag source

NOTE: ERROR_CANNOT_INIT_DRAG should be an SWTException, since it is a recoverable error, but can not be changed due to backward compatibility.

See Also:
Widget.dispose(), checkSubclass(), DND.DROP_NONE, DND.DROP_COPY, DND.DROP_MOVE, DND.DROP_LINK
Method Detail

getAdapter

public <T> T getAdapter(java.lang.Class<T> adapter)
Description copied from class: Widget
Implementation of the Adaptable interface.

IMPORTANT: This method is not part of the RWT public API. It is marked public only so that it can be shared within the packages provided by RWT. It should never be accessed from application code.

Specified by:
getAdapter in interface Adaptable
Overrides:
getAdapter in class Widget
Parameters:
adapter - the lookup class
Returns:
an object that can be cast to the given class or null if there is no adapter associated with the given class.

addDragListener

public void addDragListener(DragSourceListener listener)
Adds the listener to the collection of listeners who will be notified when a drag and drop operation is in progress, by sending it one of the messages defined in the DragSourceListener interface.

Parameters:
listener - the listener which should be notified
Throws:
java.lang.IllegalArgumentException -
  • ERROR_NULL_ARGUMENT - if the listener is null
SWTException -
  • ERROR_WIDGET_DISPOSED - if the receiver has been disposed
  • ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
See Also:
DragSourceListener, getDragListeners(), removeDragListener(org.eclipse.swt.dnd.DragSourceListener), DragSourceEvent

checkSubclass

protected void checkSubclass()
Description copied from class: Widget
Checks that this class can be subclassed.

The SWT class library is intended to be subclassed only at specific, controlled points (most notably, Composite and Canvas when implementing new widgets). This method enforces this rule unless it is overridden.

IMPORTANT: By providing an implementation of this method that allows a subclass of a class which does not normally allow subclassing to be created, the implementer agrees to be fully responsible for the fact that any such subclass will likely fail between SWT releases and will be strongly platform specific. No support is provided for user-written classes which are implemented in this fashion.

The ability to subclass outside of the allowed SWT classes is intended purely to enable those not on the SWT development team to implement patches in order to get around specific limitations in advance of when those limitations can be addressed by the team. Subclassing should not be attempted without an intimate and detailed understanding of the hierarchy.

Overrides:
checkSubclass in class Widget

getControl

public Control getControl()
Returns the Control which is registered for this DragSource. This is the control that the user clicks in to initiate dragging.

Returns:
the Control which is registered for this DragSource

getDragListeners

public DragSourceListener[] getDragListeners()
Returns an array of listeners who will be notified when a drag and drop operation is in progress, by sending it one of the messages defined in the DragSourceListener interface.

Returns:
the listeners who will be notified when a drag and drop operation is in progress
Throws:
SWTException -
  • ERROR_WIDGET_DISPOSED - if the receiver has been disposed
  • ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
See Also:
DragSourceListener, addDragListener(org.eclipse.swt.dnd.DragSourceListener), removeDragListener(org.eclipse.swt.dnd.DragSourceListener), DragSourceEvent

getDragSourceEffect

public DragSourceEffect getDragSourceEffect()
Returns the drag effect that is registered for this DragSource. This drag effect will be used during a drag and drop operation.

Returns:
the drag effect that is registered for this DragSource

getTransfer

public Transfer[] getTransfer()
Returns the list of data types that can be transferred by this DragSource.

Returns:
the list of data types that can be transferred by this DragSource

removeDragListener

public void removeDragListener(DragSourceListener listener)
Removes the listener from the collection of listeners who will be notified when a drag and drop operation is in progress.

Parameters:
listener - the listener which should no longer be notified
Throws:
java.lang.IllegalArgumentException -
  • ERROR_NULL_ARGUMENT - if the listener is null
SWTException -
  • ERROR_WIDGET_DISPOSED - if the receiver has been disposed
  • ERROR_THREAD_INVALID_ACCESS - if not called from the thread that created the receiver
See Also:
DragSourceListener, addDragListener(org.eclipse.swt.dnd.DragSourceListener), getDragListeners()

setDragSourceEffect

public void setDragSourceEffect(DragSourceEffect effect)
Specifies the drag effect for this DragSource. This drag effect will be used during a drag and drop operation.

Parameters:
effect - the drag effect that is registered for this DragSource

setTransfer

public void setTransfer(Transfer[] transferAgents)
Specifies the list of data types that can be transferred by this DragSource. The application must be able to provide data to match each of these types when a successful drop has occurred.

Parameters:
transferAgents - a list of Transfer objects which define the types of data that can be dragged from this source

Eclipse Remote Application Platform

Copyright (c) EclipseSource and others 2002, 2012. All rights reserved.